Can You Put HID Bulbs In Projector Headlights? – Step-by-Step Guide

Related Posts

We hope you love the products we recommend! Just so you know, we may collect a share of sales or other compensation from the links on this page. Thank you if you use our links, we really appreciate it!

Today we have gathered much information to answer the most frequently asked question ” Can You Put HID Bulbs In Projector Headlights?” so, without further delay, let us begin with the introduction of HID bulbs.

High-intensity discharge, or HID, are the bulbs that are brighter than regular headlights. A glass enclosure surrounds two tungsten electrodes that make up an HID headlight. They are frequently referred to as xenon lights due to the presence of xenon gas in the bulb.

Standard HID and Bi-Xenon are the two different varieties of HID headlights. In settings where there are two bulbs—one for the low beams and another for the high beams—standard HID lights come in use. The only application for Xenon HID bulbs is projector headlights. When used in reflector headlights, HID bulbs are too bright and the light they create can cause other drivers to become legally blind.

Can You Put HID Bulbs In Projector Headlights

Is it possible to put HID bulbs in projector headlights?

Yes, it is possible to put HID bulbs in projector headlights but you’ll have to use an HID Conversion Kit. Halogen-compatible areas won’t accommodate xenon HIDs. So, each projector is made to work with a specific type of bulb. You cannot expect a projector to fit or function properly by merely inserting the bulb from an outdated HID kit.

Projectors make your headlights brighter by focusing all of the available light where you need it on the road rather than dispersing it into an unfocused blob. High-performance headlights called projectors were at first exclusively seen in high-end cars. High-intensity discharge (HID) and light-emitting diode (LED) bulbs are dangerous to use with conventional reflector headlights but you can use them with projectors because of their tremendous brightness.

How to put HID bulbs in projector headlights?

The steps for installing HID bulbs in projector headlights are the same whether you’re using a conversion kit or changing the bulbs in existing HID lights. You just need to follow them.

  • First of all, eliminate the old bulbs by removing the cap from the headlight assembly’s back by opening the hood of your car. You might be able to release the headlight by removing a further screw located above it.
  • When the glass bulb is cool, carefully remove it with a rubber glove or wait until the headlight assembly component is completely disassembled before unplugging any cabling to the ballast.
  • The headlight housing should now contain the HID bulbs. Avoid making contact with the bulb as you delicately put the light into the headlight housing. Rubbish alcohol can be used to clean the glass if you do happen to touch it by accident.
  • After installing the HID lights in the housing and inserting the ballast into the socket, attach the bulb to the ballast.
  • Check to see that your new headlights work before using them. In that case, rotate the adapter 180 degrees. Flip the adaptor again in a 180-degree direction if the headlights still won’t come on.
  • Close the hood and secure any screws or bolts you previously removed.

How do HID bulbs work?

HID bulbs work differently than LED lights. HIDs exploit the property of noble gases to shine when applied to electricity, as opposed to halogen bulbs, which produce light using a tungsten filament. HID bulbs, more specifically, contain Xenon contained in a glass container, which illuminates when an electric arc is created by two electrodes. This is how neon lights operate, but with a different gas within.

See also  Tensioned vs Non-Tensioned Projection Screen

The car sector uses xenon lights because they can create a brighter light in a smaller space than neon lights can. However, because they are more expensive than neon lights, xenon bulbs are not available for domestic usage. In addition to being brighter and using less electricity than halogen lights, HID bulbs also offer higher lumen output. This means that your car’s electrical system won’t be put under as much strain, giving you more power for other uses.

Pros of using HID bulb for projector headlights

  • They start by providing superior visibility and range. Having more light increases visibility and range, which makes nighttime driving safer. It’s usually advantageous to recognize signs, road hazards, people, and animals sooner.
  • HID lighting emits light in all directions. Projectors can gather, focus, and increase the length of the projected HID beam.
  • HID lighting is also simple to install. Most HID bulb kits just require simple instructions to be followed during installation.
  • The principal benefit is a significant increase in street lighting, which leads to increased nighttime driving security.
  • HID bulbs are significantly more energy-efficient than halogen units, which means they use less electricity from your car’s electrical system, improving the efficiency of your vehicle as a whole.
  • Because HID lights don’t contain filaments, they are more durable than halogen lighting.

Cons of using HID bulb for projector headlights

  • Compared to halogen or sealed beam bulbs, the price of HID bulbs and headlight assemblies is much higher.
  • Oncoming motorists may become blinded by the HID headlights’ intense glare.
  • An electrical ballast is necessary for HID headlight operation. It regulates the circuit’s current flow. You might have trouble installing the ballast if the space around the headlights of your car is especially constrained. If so, it could be necessary to add wiring, make changes to the headlight housing or the surrounding region, or find an HID bulb with the ballast already installed.

What to look for when selecting an HID bulb for projector headlights

You should take into account the following factors before installing HID bulbs in the projector’s headlight:

HID Bulb Dimensions

You can’t just go out and buy random HID bulbs to put in your tiny projector’s headlight because they come in different sizes, much like headlights. Typically, the headlight of a tiny projector is compatible with three sizes of HID bulbs. D1S, D2S, and D4S respectively.

Dimensions of the Headlights

Since headlights now come in a variety of sizes and shapes, it’s crucial to get HID bulbs that match the size of your headlights before installing them.

The Beam Patterns

Depending on how many bulbs you are utilizing in your tiny projector’s headlights, you must decide whether to use a high beam or low beam bulb. Certain HID bulbs only produce a single beam intensity, making them only viable for cars with Xenon headlights, which employ an HID bulb for the low beam and a halogen bulb for the high beam. Look for HID bulbs with two intensities or those that can be used for both the low and high beams if your car has bi-xenon headlights.

Conclusion

So, now your confusion regarding Can You Put HID Bulbs In Projector Headlights? Must have been solved after reading our detailed guide. As with so many alternatives on the market, improving your car’s lighting is simpler than ever. You can now easily switch to HID bulbs, which provide a significantly stronger beam of light.

Moreover, the exceptional capacity of HID headlights to illuminate the road while using significantly less energy has made them one of the most widely used choices in recent years. Also, HID bulbs, don’t require large housing to generate focused and brilliant light, thus HID bulbs in projector headlights appear much better. So upgrade your projector headlights with HID bulbs and the greatest HID headlights will transform the darkness into daylight. Thanks for reading!

Related Posts

Leave a Comment